Disclosure: As an Amazon associate, we may earn commission from qualifying purchases with no additional costs to you.

How to Wrap a Knife Handle with Leather-The Easiest Way!


Last Updated on November 19, 2022

The handles of knives are typically constructed of wood, plastic, or metal. Wrapping your knife handle in leather, on the other hand, is the ideal way to acquire a more comfortable and attractive grip! But How to wrap a knife handle in Leather?

Wrapping a knife handle is simple and only involves a few tools, but you must be careful not to damage the blade of the knife throughout the procedure. Wrapping the handle of a knife not only gives it a unique design but also provides you with extra grip, which can help you avoid mishaps while cutting food.

Rope or thread can be used to wrap some blades, but most people prefer leather. There are a couple of various approaches you can take, and they’re all much easy than you might imagine. In reality, with a little know-how and the correct tools, you can entirely wrap the handle of your knife in leather in no time.

Best Way to Wrap a knife With Leather- Step-By-Step Guideline

How to Wrap a Knife Handle with Leather!

Knives are essential kitchen equipment. When used incorrectly, they’re also highly sharp and hazardous. It’s critical to keep your knives well-maintained and sheathed while not in use to avoid unwanted accidents. Learning how to wrap a knife handle in leather will help you keep your knives in good shape for years to come!

Knife handles made of leather are not only attractive but also quite durable. Wrapping a knife’s handle in leather is a simple DIY project that provides both elegance and protection. The materials you’ll need to wrap a knife handle in leather are listed below.

Materials needed to wrap a knife handle with leather

Materials to wrap a knife handle with leather include:

  • Leather cloth
  • Superglue
  • A sharp utility knife or razor blade (to cut the leather off)
  • A ruler (to measure the length of the leather strip)
  • A pencil (or other marking tools)
  • Fray Check (to stop the fraying of the edges after cutting)

Step-By-Step Guideline

1. Prepare the Leather

Before you begin trimming the leather, you should first evaluate the measurement of your knife’s handle. To prepare the leather, you’ll need a leather carving knife.

After you’ve measured the knife’s handle, you’ll need a leather string that’s a minimum of five times the span of the handle.

Strips of leather, The fatter they are, the further harder it is to deal with them; but, the ultimate outcome will be stronger. Most applications require leather that is 0.7-1millimeters thick.

Immerse the leather in freshwater for a few minutes to soften it up and make it easier to deal with. The leather strip must be submerged in water for approximately half an hour.

You may believe that the leather may become moist. However, this step is necessary for softening the leather.

When the leather dries out after you’ve finished wrapping it around the handle, it will compress as well as tighten.

2. Make a Loop

Make a knot in the leather and tighten it all around the wooden handle after it’s flexible enough. Since this knot serves as the foundation for the knife handle, it’s crucial to do it right.

To hold the leather thread in place, consider placing your thumb on the threading of the fabric at the bottom of the knife handle’s tip.

You may need to repeat the whole cycle until the knot meets the opposite side of the handle by waving the lacing under the previous rotation.

3. Cut The Extra Leather

You can clip the tail down if there are any spare leather remains. You can however create a loop across your cuff, which will be useful later on.

Furthermore, burn the edge with a match until it melts.

Additionally, you can use electrical tape to tape the string. However, make absolutely sure the looping is strong enough to prevent the wrap from moving.

4. Start Wrapping

You can begin winding the leather throughout the handle once the thread and knot have been tightened. You can begin covering the knife handle with the material.

Make a firm wrap and work your way down until you’ve reached the bottom of the handle. To gain a good grip, make sure your wraps are tight. It will also provide the handle with a more prominent appearance.

5. Tie The Knot At The Bottom

Connect the other end and surround the leather threading once you finish tying the leather to the base of the knife. Make several knots all the way down to the bottom there till only a small portion remains, then cut that off.

The knot will hold the loop in place and protect the leather wrapping from coming loose.

6. Let The Leather Dry

As you worked on the leather wrap while it was still wet, you must now properly dry it. When the leather dries, it shrinks, tightening the grip and making the wrap even more durable.

You can use the knife freely once the leather has dried. It’s worth noting that you could find it difficult to utilize at first.

Your favorite design can be colored, painted, embossed, carved, and stitched into leather. You’ll feel proud of the completed result knowing that you created it from beginning to end!

Advantages of Wrapping the Handle of the Knife with Leather

Leather and paracord are the most popular materials for wrapping knife handles. While both have advantages and disadvantages, the best material to select will be determined by your requirements.

Leather knife wraps are a popular choice for bespoke knife handles. These wraps provide your knife with a strong, comfortable grip for everyday usage or in an emergency. Leather is a renewable resource that is a far more environmentally friendly option than other materials.

If you want something that appears professional, leather is a terrific choice. It’s also more resistant to abrasion than paracord, so it’ll last longer. However, you’ll need specialized tools to work with it, so if you haven’t worked with leather before, you might want to go for something else.

The biggest benefit of a leather-wrapped knife is that it gives excellent grip even when your hands are wet. Leather does not absorb water due to its natural moisture-repellent characteristics, thus your knife will stay dry at all times.

In the haute couture kitchen, leather knife hilts are extremely popular. It’s easy to see why: covering your knife’s handle in leather gives it a fashionable aesthetic, makes it more pleasant to hold, and increases its safety.

Disadvantages of Wrapping the Handle of the Knife with Leather

There are some drawbacks to using leather to wrap the handle of a knife, but they are small in comparison to the benefits. For one thing, leather is not very durable. As a result, your wrap will loosen with time.

We often wrap the handle of a knife in leather to make it easier to hold and prevent the hand from slipping. Many people, however, fear that this technique of holding the knife can injure the hands as well as make it easier to fall off.


I finally learned how to wrap my blades in leather after years of using a dull knife. It’s surprising how much more comfortable and in control you can be! I hope that this instruction will also assist you in doing the work for yourself. Because when it comes to DIY projects, it’s unusual to find someone who takes the time to do things correctly. We wish you nothing other than the best!

Leave a Comment